The filling speed of the soft capsule filling machine is fast, and the size difference of the filling machine is small. In addition, the filling machine has many advantages such as fast arrangement speed, high efficiency, simple operation, convenient maintenance and low power consumption.
The vacuum separator of the vacuum system of the soft capsule filling machine mainly plays the role of sucking the capsule into the upper and lower modules and separating the cap and the body in the filling of the hard capsule. If the capsule cannot be separated from the cap and the body, the subsequent filling will not be carried out. Each time the turntable of the filling machine rotates at one station, the main shaft of the machine rotates once, and the vacuum separator of the filling machine moves up and down once under the action of the cam.
If the capsule cap and body are not separated smoothly, check the gap between the upper plane of the vacuum separator and the lower plane of the lower module. If the gap is too large, the vacuum degree of the vacuum system will not reach the vacuum degree required for the separation of the cap and the body. If the gap is too small, it is easy to cause collision and deform the lower module. When the position of the vacuum separator needs to be adjusted, use the handle to turn the main motor shaft of the soft capsule filling machine to make the vacuum separator rise to the z-high position, loosen the locking nuts at both ends of the adjusting rod under the machine table, and then rotate the adjusting rod to adjust The height of the vacuum separator, then lock the nut and turn the main motor shaft with the handle until it is suitable. The vacuum degree is read out on the vacuum gauge on the machine operation panel. When the vacuum is too high, the vacuum degree regulating valve can be properly opened, and when the vacuum is too low, the vacuum degree regulating valve can be turned off or closed. The filter of the vacuum system of the filling machine should be opened regularly to remove the blocked dirt to ensure that the vacuum system has sufficient vacuum.